1. Introduction H803SA has eight output ports, drives maximum 8192 pixels. Three buttons and LCD screen are convenient for operation. Can be synchronized with AC power supply and connected to DMX console. H803SA can drive the following chips: LPD6803, LPD8806, LPD6812, LPD6813, LPD1882, LPD1889, LPD1883, LPD1886, DMX512, HDMX,APA102, APA104, P9813, P9823, LD1510, LD1512, LD1530, LD1532, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, WS2801, WS2803, WS2811, DZ2809, SM16716, TLS3001, TLS3002, TM1812, TM1809, TM1804, TM1803, TM1914, TM1926, TM1829, TM1906, INK1003, BS0825, BS0815,BS0901, LY6620, DM412, DM413, DM114, DM115, DM13C, DM134, DM135, DM136, 74HC595, 6B595, MBI6023, MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, etc.
Auxiliary software is "LED Build Software".
Notice: the maximum pixel number that each port can control only means the output ability of controller, whether actual signal can transmit to the end or not depends on the performance of lamp, EMI of switch power supply and the total interference of engineering field.
2. Performance (1).Eight output ports, controls maximum 8192 pixels, each port controls maximum 1024 pixels. (2).SD card supports FAT32, FAT16 format; the maximum capacity is 64G bytes, stores up to 64 DAT files. (3).Many controllers can be synchronized with AC power supply. (4).Can connect to DMX console, replace file, and adjust speed and brightness and responses quickly. (5).The buttons and LCD screen are convenient to set the parameters. (6).Support encryption by limiting the number of power-on time.